CNC Spindle, MYSWEETY 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving

500W Spindle Motor + 110V Velocity Governor with MACH3 + Mount bracket + 13PCS ER11 gather + 4 Screws

Feature:
Enter: AC110V± 10percent50/60Hz
Running voltage: 100VDC
Energy: 500W
Present: 4A
Velocity: As much as idle As much as 12,000 rev / min
Torque: 5000G/CM
Insulation resistance:> 2 megohms
Dielectric power: 400V
Diameter: 52mm
Chuck component Duration: 45MM
Chuck component diameter: 16mm
Motor Duration: 200MM
Top precision spindle runout 0.01-zero.03
Energy provide Specification: (and this spindle aiding using the)
13Pcs ER11 Collet Set Gripping Vary: 1MM to 7MM
(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm), Run-out tolerance 0.01mm (zero.0006″)

Package together with:
1 x 500W Air-Cooled Spindle Motor
1 x 110V Velocity Governor with MACH3
1 x 52mm Mount bracket
13 x ER11 collect
4 x Screws(loose)
Running voltage: 100VDC, Energy: 500W, Enter: AC110V, Velocity: As much as idle As much as 12,000 rev / min, Torque: 5000G/CM.
Insulation resistance:> 2 megohms, Dielectric power: 400V.
Diameter: 52mm, Chuck component Duration: 45MM, Chuck component diameter: 16mm.
Motor Duration: 200MM, Top precision spindle run out 0.01-zero.03
one hundred% provider quality, You probably have any questions, please touch us