Hitachi NV45AB2 7/8-Inch to 1-3/4-Inch Coil Roofing Nailer (Side Load) (Discontinued by the Manufacturer)

The NV45AB2’s “magazine, depth of drive, and bullet proof design are very good; it’s essential to more than likely drive an 18-wheeler over this tool and it might still work,” Tools of the Trade Magazine, July/August 2005. The 1-3/4″ Roofing Nailer is used for more than a few construction works such because the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 has a facet load magazine.
Lightweight and sturdy, the Hitachi NV45AB2 1-3/4-Inch Coil Roofing Nailer stands as much as the weather and gives consistently accurate results over the lifetime of the tool. A perfect tool for a number of construction projects, including installation of asphalt roofing shingles and insulation boards, the NV45AB2 includes a top-capacity side-load magazine, depth of drive, durable construction, and more.

A top-capacity magazine and quick-driving design make this roofing nailer most sensible in efficiency. View larger.

NV45AB2 1-3/4-Inch Coil Roofing Nailer Tool Specifications Fastener Type Coil, Wire Collation Magazine Angle 16° Fastener Length Capacity 7/8″ x 1-3/4″ Fastener Diameter Range .120 Magazine Capacity 120 Magazine Loading Bottom Air Inlet 3/8″ Operating Pressure 70-120 psi Jam Clearing Open Nose Depth Setting Tool-Less Actuation Contact/Sequential (opt) Tool Dimensions 9-27/32″x4-5/8″x10-3/8″<LxWxH) Weight 5.5 lbs.

All-Weather Nailer You Can Count On
The NV45AB2 has been rigorously tested in probably the most extreme roofing environments, so you’ll be able to count on it–it doesn’t matter what the forecast is. Way to a pneumatic-powered nail-feed mechanism that eliminates dirt and moisture from the nailer, you’ll be able to be sure that this tool will work in any weather.

High-Capacity Magazine and Quick-Driving Capabilities for Efficiency
The NV45AB2 includes a side-loading magazine that accepts 120 7/8-inch to at least one-3/4-inch-long coiled wire collation nails with 0.120-inch diameters. The air inlet is 3/8 inch, and the suitable operating air pressure is 70-120 psi.

The NV45AB2 has a snappy-driving feature that gives maximum efficiency when nailing large spaces by allowing the nailer to shoot each and every time the nose touches the work surface. The massive carbide inserts at the nose supply durability and function right through operation.

Designed for Maneuverability
The Hitachi NV45AB2 1-3/4-Inch Coil Roofing Nailer is lightweight at just 5.5 pounds, so it is simple to move at the same time as working on a rooftop. Its smartly-balanced design ensures simple one-handed operation, and the enduring non-slip rubber-grip assists in keeping you comfy and in keep watch over. Rubber at the nailer’s side means that you can place the tool on a roof with out being worried about it sliding off.

The Hitachi NV45AB2 Roofing Nailer measures 9-27/32 x 4-5/8 x 10-3/8 inches (LxWxH). It’s sponsored by Hitachi’s five-year limited warranty.

About Hitachi: A Tradition of Innovation
Hitachi Power Tools (Hitachi Koki USA, Ltd.) supplies professional-grade power tools for a number of applications, including woodwork, metalwork, concrete, drilling, cutting, and fastening. Hitachi is a pace-setter in power tool research and development and has achieved many firsts within the power tool industry. Nowadays, Hitachi continues the tradition of innovation and engineering with new features along with classic quality.

What’s within the Box
NV45AB2 1-3/4-Inch Coil Roofing Nailer, safety glasses, and shingle guide assembly.

Tool-less depth of drive adjustment for precision nailing/flush driving
5.5lbs, lightweight and smartly balanced for simple maneuverability
Side loading magazine convenient and simple for speedy replenishment
Rubber pads lend a hand stay nailer from sliding off roof when now not in use
Pneumatic power feed and go back lets in tool to operate within the harshest conditions