The Steinel 76000 TM 6000 cordless butane powered glue gun supplies continuous glue streams for as much as 100 mins per fuel cell at temperatures starting from 320 to 464 degrees F. The glue gun has refillable Liquid Energy Cell (LEC) butane fuel cells which might be removable for speedy refueling and secure air go back and forth, and a mechanical feed for glue sticks to care for precise keep an eye on of the glue stream. The gun warms up in three mins, and in an instant cuts off the glue stream to scale back dripping. It’s appropriate for plenty of industrial, home repair, and craft applications such as bonding portions and wires in electronic devices, reupholstering chair seats, and assembling foam model aircraft and toys.
Specifications
Operating Temperature | 320°F to 464°F (160°C to 240°C) | |
Operating Time | 100 minutes | |
Warm-up Time | 3 minutes | |
Fuel Type | Standard butane in LEC fuel cell | |
Glue | Accepts 0.five” diameter glue sticks inside of temperature range | |
Ignition | Piezo electronic | |
Nozzle Diameter | 0.08 inches (2 mm) | |
Weight | 0.75 lb. | |
Dimensions | 7.5 x 9.0 x 2.0 inches (H x W x D). (H is height, the vertical distance from lowest to best possible point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) | |
Warranty | One year limited |
Glue guns, often known as hot-soften adhesive guns, are hand tools used to use melted adhesives. The adhesive is fed robotically into the gun as an excellent stick, melted electrically or by the use of butane gas, and dispensed as a liquid onto the outside that may be to be bonded. Glue guns are used extensively in crafts and residential repair to bond materials such as lace, paper, picket, plastic, and metal, and in industrial settings to gather portions and shut paperboard cartons. Hot-soften adhesives have a few benefits over solvent-based totally adhesives: they produce very little volatile organic compounds (VOCs), which could be a long-term health hazard; solidify temporarily with out curing or drying; have an extended shelf life; and don’t lose thickness once they solidify.
Steinel manufactures warmth guns, glue guns, gas torches, and sensors. The corporate, founded in Germany in 1959, meets Global Organization for Standardization (ISO) 9001:2008 standards and is Restriction of Hazardous Substances (RoHS) compliant.
The glue gun uses LEC fuel cells and usual 0.five”diameter glue sticks (sold one at a time).
The ThermaMeltTM 6000 options the ability and sturdiness to get the job done in trade applications
It runs frequently for as much as 100 mins at the easily refillable LECTM and offers speedy even adhesive float with 1/2″ diameter glue sticks.
Instant glue float bring to a halt reducing dripping
Warms up in three mins to soften temperatures from 320 to 464 °F
Fast refueling, secure air go back and forth and powerful adhesive force,ideal for construction, Rest room repair and Pipe insulation
Reviews
There are no reviews yet.