Powermatic Air Filtration System, 5-Micron Filter, 1196 CFM, 115V 1Ph (Model PM1200)

1791330 Features: -Air filtration system.-PM1200. Assembly Instructions: -Assembly required. Dimensions: -Dimensions: thirteen” H x 25” W x 33” D.
The Powermatic PM1200 Air Filtration System uses a two-step filtration process to lure as much as 99% of 5-micron particles and 85% of 1-micron particles. This unit may also be operated at the cabinet or with the included remote radio frequency transmitter. It includes important hardware for mounting to the ceiling and is derived with filter out guards that may be installed and got rid of with out tools.

The PM1200 Air Filtration System At a Glance: Double filtration system traps particles as small as 1 micron Remote keep an eye on operates on radio frequency for wider range Includes timer with 9 settings for as much as 9 hours of continuing operation Includes 4 eye bolts for suspension from shop ceiling Indicator lighting fixtures up after 200 hours to remind user to switch filters

The PM1200’s two-step filtration system captures particles as small as one micron. View larger.

The exit filter out disperses clean air, supplying you with a debris-free work environment. View larger.

Traps 99% of Five Micron and 85% of One-Micron Particles
Designed to strike the right kind balance between air waft and filtration, the PM1200 is perfect for the pro woodworking shop, where dirt and debris can compromise air quality. The PM1200 uses two filter out stages: the outer filter out captures large particles and the internal filter out catches the smaller particles that pass throughout the outer filter out.

The electrostatic, disposable outer filter out eliminates 99% of 5-micron particles, at the same time as the internal filter out captures 85% of 1-micron particles and has Prime-mesh pockets that may be blown clean.

Readily-To be had, Durable Filters
For simple upkeep, the PM1200 uses intake filters measuring 24.0 x 12.0 x 1.0 inches (WxHxD), a readily To be had size. The exit filter out does now not require replacement and may also be periodically wiped clean with a vacuum or compressed air to verify efficient operation.

Both the inlet and outlet filter out guards are simple to put in and cast off with out tools. The system grilles are secured by way of simple, finger-operated catches–they arrive off easily but keep securely in place all over use.

Full Set of Controls to Save Energy
Because woodworking stores have fluctuating levels of dust, the PM1200 features a full set of controls, all of which might be conveniently situated both at the system itself and at the included remote keep an eye on with simple-to-read LCD screen. Set one of the most three To be had speeds–Low (547 CFM), Medium (706 CFM), or Prime 1,196 (CFM)–to compare current stipulations and save on energy prices.

To be certain long-term performance, the PM1200 also boasts a programmable timer with nine settings for as much as nine hours of operation, a re-settable pop-out fuse that protects the unit in case of an influence surge, and a “change filter out” light that routinely comes on after 200 hours of use.

The PM1200 is sponsored by a five-year warranty.

What’s within the Box
Air filtration system; remote keep an eye on with mounting bracket; nine-volt battery; four eye bolts; four hex nuts; four flat washers; manual; and warranty card.

The on-board panel and remote keep an eye on let you use the PM1200 from anyplace. View larger.

3 filter out system features a diffuser to disperse exhaust air
Remote keep an eye on operates on radio frequency for wider vary of effectiveness
Timer has 9 settings for as much as 9-hours of continuing operation
Inner filter out has fine mesh pockets for top potency may also be blown or washed clean
Electrostatic outer filter out is disposable